Si-PU Field System's Material
Si-PU Primer for concrete sub-base

Single compnent Si-PU primer for concrete sub-base

Export (Spec):WM-01

  • Density
    0.9-1.1g/cm3
  • Viskosity
    100cps, 25℃
  • Packing Size
    15Kg/drum
  • Color
    Yellow transparent
  • Shelf life /Storage
    6 months at 10-30 ℃,avoid direct sunlight
  • Substrate and aplication temperature
    10-35℃(mind 3℃ above dew point)
  • Pernissible relative humidity
    Min. 40%~Max.90%
  • Can be walked on
    1-2 hours
  • Material consumption
    0.2-0.3Kg/cm2
  • Si-PU Sealer Layer Material

    Si-PU Sealer Layer Material is one kind of latex material, water based one component . Mix with Composite portland cement and sand (60-80 mesh size) by weight ratio of 1:1:1, coating on asphalt SBR rubber/mat sub-base.

    Export(Spec):WM-111

  • Density
    1.10g/cm3 ,25℃
  • Viskosity
    >100cps, 25℃
  • Packing Size
    20Kg/drum
  • Color
    with blue water emulsion
  • Shelf life /Storage
    6 months at 5-35
  • Substrate and aplication temperature
    Min. 30%~Max.90%
  • Pernissible relative humidity
    5-35℃(mind 5℃ above dew point)
  • Can be walked on
    The next installation day
  • Material consumption
    0.7-1Kg/cm2(min cement & sand by 1:1:1)
  • Si-PU Elastic/Strengthen Layer Material

    Si-PU elastic layer / strengthen layer material; one-component,environmental protection, self-leveling feature, available tools scratch,but also mechanical spraying.

    Export (Spec):WM-02/03

  • Density
    1.56g/cm3, 25℃
  • Viskosity
    12000~15000cps, 25℃
  • Packing Size
    25-30Kg/drum
  • Color
    Light Green
  • Shelf life /Storage
    3 months at 10-30 ℃,avoid direct sunlight
  • Substrate and aplication temperature
    10-35℃(mind 3℃ above dew point)
  • Pernissible relative humidity
    Min. 30%~Max.90%
  • Can be walked on
    The next installation day
  • Material consumption
    1.25Kg/m2/mm
  • Si-PU Colorful Surface Layer Materical

    Si-PU surface layer material is two component water-based material, bright color, can be any choice, painting by tools or small gun.

    Export (Spec):WM-01

  • Solids content
    50-53%
  • Viskosity
    10000cps~15000cps, 25℃
  • Packing Size
    Color paste(A):18Kg, Curing agent (B):2Kg
  • Color
    On request
  • Shelf life /Storage
    6 months at 10-25
  • Substrate and aplication temperature
    10-35℃
  • Mixing time
    2 minutes
  • Curing time
    2 hours
  • Material consumption
    0.3Kg/cm2
  • Si-PU Sports Field Construction Process